Bearing Heavy Vehicles and Equipment, Suitable for Civilian Traffic-Bailey Bridge

• Customization: Available
• After-sales Service: Guidance and Installation Services
• Warranty: 3 Years
• Model NO.: HD200/CB200/ZB200/Compact-200
• Certification: DIN, JIS, GB, BS, ASTM, AISI
• Life: Temporary Bridge
• Across Way: Fixed Bridge
• Lane Position: Down Through Bridge
• Usage: Over Water Bridge, Tractor Bridge, Pontoon, Footbridge, Public Iron Dual Purpose Bridge, Highway Bridge
• Scale: Middle Bridge
• Stress Characteristics: Truss Bridge
• Material: Steel Bridge
• Steel Grade: S355/ S460/Gr 55c/Gr350/Gr50/Gr65/GB355/460
• Loading Capacity: Hl93/Ha+20hb/T44/Class a/B/MLC110/dB24
• Carriage Way Width: 3.15m Std. /4.2m Ew/7.35m Double Lanes
• Model Alias: CB200/Zb200/Compact-200
• Maximum Span: 60.96m for Single Lane/45.72m for Two Lanes
• Transport Package: Transported by Container/Truck in Strong Packing
• Specification: Panel dimension 3.048m*2.134m
• Trademark: GreatWall
• Origin: Zhenjiang
• HS Code: 7308100000
• Production Capacity: 100, 000 Tons

Product Description

Product Description

 

The HD200 bailey bridge is similar to the HD100 bailey bridge and 321-Type panel bridge from their appearance. The difference is its increased panel height to 2.134m. For some bridge with longer spans, lt employed the method of alternating joints between Reinforcement Chords and the joints between panels. This method can decrease inelastic deformation caused by the oversized pinholes. Pre-arch method is used to additionally cut down mid-span and vertical deflection to a larger degree. Bolt-connected components use the orienting sleeve-fixing method to increase accuracy of connections. Shear is created in orienting sleeves and tension is developed in bolts,which increase the usage life of the bolts and ensure the safety of panel bridges. Sway Brace is made of integral type and connected with the transom to improve the overall stability of the assembled steel bridge. The part between braced frame and panels is fixed through bridging so as to prevent the whole bridge from side bending. After the erection, there will be a pre-arched degree over the span of the bridge. Besides it can be assembled into single-lane bridges. The compact 200 panel bridge can also be assembled into double lane bridge, hence it broadens its application range. It is suitable for the load designs of HS-15,HS-20,HS-25,HL-93 and pedrail-50 etc.

  Compact200 Bailey bridge 
SECTION PROPERTIES(ONE TRUSS)

CONST.	SECTION PROPERTIES
	SECTION AREA OF CHORD	BENDING FACTOR	MOMENT OF INTERTIA
	(cm^2)	(cm^3)	(cm^4)
SS	25.48	5437	580174
SSR	50.96	10875	1160348
DS	50.96	10875	1160348
DSR1	76.44	16312	1740522
DSR2	101.92	21750	2320696
TS	76.44	16312	1740522
TSR2	127.4	27185	2900870
TSR3	152.88	32625	3481044
QS	101.92	21750	2320696
QSR3	178.36	38059	4061218
QSR4	203.84	43500	4641392

 

ALLOWABLE STRESS OF PANEL
Material yield strength of panel σ_S=345MPa
Material allowable stress [σ]=0.8×σ_S=276 MPa
Allowable bearing stress [N]= [σ]×F×φ=276×2548×0.751=528kN=54t
Stability factor of chord  SSφ_SS=0.751;DS φ_DS=0.897
Allowable moment of panel [M]= [N]×h=528×2.134=1127kN·m=115t·m
 

Compact-200 Bailey bridge Truss Allowable Internal Force Table(Half-bridge)

Allowable Internal Force		Allowable Bending Moment[M] (kN·m)	Allowable Shears force[Q] (kN)	High-shears Union Allowable Shears Force [Q]H (kN)
Configuration
SS	SS	1127	257	348
	SSR	2254	257	348
DS	DS	2525	514	696
	DSR1	3381	514	696
	DSR2	5050	514	696
TS	TS	3800	771	1044
	TSR2	5635	771	1044
	TSR3	7600	771	1044
QS	QS	5050	1028	1392
	QSR3	7889	1028	1392
	QSR4	10100	1028	1392

   

 

Company Profile

Our Advantages

Certifications

After Sales Service

Our Customers

FAQ

Q: Which countries do you export to?
A: Our company's products have been exported to dozens of countries and regions. Including: Nepal, Cambodia, Laos, Vietnam, Malaysia, Myanmar, Philippines, Ecuador, Colombia, Barbados, Trinidad and Tobago, Dominica, Papua New Guinea, Solomon Islands, Kenya, Tanzania, Zambia, Congo, Tajikistan, Georgia, etc.

Q: Are you a factory or a trade company ?
A: We are an industry and trade company. The factory covers an area of 47,000 square meters, the production workshop is 22,000 square meters, and the office area is 5,000 square meters. It has 12 production lines of Bailey Bridge, various steel Bridges and various steel structure products, with a lifting capacity of 100 tons. Annual output is more than 50,000 tons. The company has its own import and export rights, with 20 years of export business experience.

Q: Do you accept custom processing?
A: Our company has an efficient and flexible technical team, we can process custom-made a variety of non-standard Bailey bridge, steel bridge, steel structure.

Q: Can your company meet American standards?
A: Yes, our products not only meet the AASHTO American standard, but also meet the British BS5400, Australia AS5100 and other international standards.

Q: Which airport is the nearest to your company? Can I visit your company anytime?
A: The nearest airports are Nanjing Lukou International Airport and Shanghai Pudong International Airport. You can visit our company  anytime, our company will issue an invitation letter and arrange to pick you up according to your needs. Your transportation and accommodation during your visit to our company will be arranged by our company.

Q: Could you send me some hard copies of your catalogues?
A: Sure. Please send us your address and contact information and we will send it to you by international express as soon as possible.

Q: Can we be your agent or distributor?
A: Our company is recruiting powerful partners all over the world for common development and win-win . Look forward to long-term cooperation with you!

Q:How soon can I receive your reply after I send you my inquiry?
A: We will give professional and technical feedback within 6 hours after receiving your inquiry . After communicate the technical parameters,we will provide quotation and preliminary design within 24 hours.